SP1000 single-port
Built by Shenzhen Edge Medical · China· Launched 2017
Not enough evidence to rank. Listed among 96 Surgical / Medical robots; 39 carry a rank.
See the rankingWatch it work
1 videoRoboScore
Out of 100. Checks on sales, customers, specs and track record.
Weak evidence
No named customers yet. The score uses the rest of its record.
4 of 9 checks have data
Updated daily from public data. Missing data is skipped, never counted as zero.
What counts
Average of the 4 checks with data. Checks without data are left out.
Overview
The SP1000 is a single-arm, single-port surgical robot from Edge Medical, a pioneering Chinese medical robotics company. It is the first multi-department-approved single-arm robot in China, validated by over 1000+ surgeries performed by 100+ experts. The single-port design enables surgical procedures through a single access channel. It features proprietary technologies including AgileArm™ for full four-quadrant coverage, DriveBoxFlip™ for upper/lower quadrants, Hide-in-Sleeve™ for ultra-close lesions, and SmartAnchor™ for ultra-distant targets. Applicable to gynecology, urology, general surgery, thoracic surgery, head and neck surgery, and oral surgery. Currently under registration in over 50 countries.
Flagship features
- First multi-department-approved single-arm robot in China
- Validated by 1000+ surgeries performed by 100+ experts
- Single-port design via a single access channel
- Proprietary technologies: AgileArm™ (full four-quadrant coverage), DriveBoxFlip™ (upper/lower quadrants), Hide-in-Sleeve™ (ultra-close lesions), SmartAnchor™ (ultra-distant targets)
- Applicable to gynecology, urology, general surgery, thoracic surgery, head and neck surgery, and oral surgery
- Edge Medical is among the few globally to offer a bronchoscopic surgical robot
Will it fit your job?
Tell us the job in plain words — we'll show how this robot measures up, line by line.
At a glance
Specifications
Specifications not yet on file.
Company profile
- Recorded funding
- US$292M· 2 rounds
- Founded
- around 2017
Detailed specifications
What it is built for1
- surgical assistant
Other details1
- Teleoperation Supported
- Yes
Who uses it
No named customer yet
A customer is listed when a public source names them, or the maker adds them.
10 other robots in this category have one.
Add a customer →Company milestones(estimated)
- 2026DeploymentFirst MP1000 installation in western Indonesia
- Mar 2026MilestoneSP1000 expanded to thoracic surgery
- Jan 2026FundingHong Kong IPO
- 2025LaunchMSP2000 CE Mark certification
- 2022LaunchNMPA registration approval for MP1000
- 2021FundingCross-over round valuation
- 2021MilestoneFirst clinical trial of EDGE MP1000
- 2017MilestoneCompany founded
Compare with
- Compare SP1000 single-port with Mako Total HipRoboScore 72.6
- Compare SP1000 single-port with Mako Partial KneeRoboScore 69.7
- Compare SP1000 single-port with MabuRoboScore 69.4
- Compare SP1000 single-port with Mako SpineRoboScore 67.4
- Compare SP1000 single-port with HAL FOR MEDICAL USE LOWER LIMB TYPERoboScore 67.3
More by Shenzhen Edge Medical
Shenzhen Edge Medical in the news
the maker1 event · last 12 months
- Aug 28Shenzhen Edge Medical Narrows Loss as Surgical Robot Sales Surge
Shenzhen Edge Medical in the news
the maker1 event · last 12 months
News about Shenzhen Edge Medical, the maker, not about this robot specifically, except rows marked this robot. Collected and classified independently across 1 outlet, so a maker cannot add to it. It never changes this robot's RoboScore (the evidence half of the RoboIndex) and it can move it up a board by at most 15 points. See all Shenzhen Edge Medical news
Frequently asked questions
- Who makes the SP1000 single-port?
- The SP1000 single-port is developed by Shenzhen Edge Medical, based in China.
- What type of robot is the SP1000 single-port?
- The SP1000 single-port is a Surgical / Medical robot made by Shenzhen Edge Medical.
- How much does the SP1000 single-port cost?
- Pricing for the SP1000 single-port is not publicly listed. Contact Shenzhen Edge Medical for a quote.
- When was the SP1000 single-port launched?
- The SP1000 single-port was launched in 2017.
- What are the key specifications of the SP1000 single-port?
- Key specifications of the SP1000 single-port: procedures gynecology, urology, general surgery, imaging compat. 3D endoscopy.
Reviews for SP1000 single-port
Loading reviews…