At 8:30 p.m. on November 14, 2019, an employee was working for a firm that made medical and surgical instruments. She supervised mechanics and repair technicians. She was working in the facility's HA department, where the HA1 and HA2 robotic work cells were located. She was changing out a plasma spray gun from the HA2 robot. The robot was still energized. It had not been locked out. As she was loosening a bolt to detach the plasma spray gun from the robot, the wrench she was using contacted a metal fitting on the spray gun water line. An arc flash ensued. The employee received second-degree burns on two fingers on her left hand and on her right wrist. She was treated without hospitalization. The employee had not been trained on lockout or the use of padlocks. The interlocked access doors to the cell were equipped with a limit switch that did not deenergize the robot or the spray gun. The employee entered the cell two to three times daily. A risk assessment had not been performed. The employer was not enforcing energy control procedures.

At 8:35 p.m. on October 22, 2019, an employee working for a plastics plumbing fixtures manufacturer was receiving parts from a robot press machine. The robot press struck the employee in the head. The employee lacerated his head and sustained a concussion, requiring hospitalization.

At 8:00 a.m. on October 16, 2019, an employee was working on the paint line in Section 1200 and entered into an area that was chained off with LOTO signs to free a jammed pallet. The employee was struck by a fiber concrete board that was rejected by a Guidel Gantry Systems Robot and crushed between it and a stack of other rejected boards, killing him.

At 7:00 p.m. on March 21, 2019, an employee was realigning robot arm and ring on Press #30. The employee's hand was in the machinery when the ejector plate/ring retracted into the press which caught the employee's left hand between the mold and the ring. The employee suffered fingertip amputations to the index and middle fingers on his left-hand. Hospitalization was not required.

At 3:15 p.m. on January 30, 2019, an employee was working at a full-service restaurant. She was operating a Robot Coupe food processor. She was feeding a piece of cabbage into the chute of the food processor. As she was aligning the piece, her finger was caught and sucked into the chute. Her finger came into contact with the blade. The tip of the middle finger on her right hand was amputated. She was hospitalized.