The Biflex Desktop is a Cobot developed by X Square Robots (China). Key specifications: axes 6, repeatability ±1 mm, api / sdk Yes.
RoboScore
Adequate evidence
No confirmed deployment on record — this score reflects the rest of the record, not verified adoption.
4 of 9 signals present
Recomputed nightly from public data. Missing data is skipped, never zero-filled — and rankings are never for sale.
Weighted factors
average of the 4 scored · blanks don't count
Ranked in the Cobot standing, against 369 robots.
See the standingWill it fit your job?
Tell us the job in plain words — we'll show how this robot measures up, line by line.
Tell us what your job needs — payload, budget, region, must-have certifications — and we'll show how Biflex Desktop measures up, requirement by requirement. The RoboScore (trust) above is shown for every buyer, regardless.
Overview
Biflex Desktop is a modular dual-arm teleoperation master-slave solution from X Square Robot, aimed at research/education, AI training, and light industrial scenarios. It combines a master-arm teleoperation stand with two high-performance 6-axis collaborative arms (based on the EX001), connected via wired link to deliver low-latency, high-fidelity master-slave mapping. The operator grips an ergonomic handle to drive both arms through full-pose fine manipulation (grasping, assembly, sorting) within a desktop workspace. Each arm has 3 kg rated payload (7 kg peak for 30s), ±1mm repeatability, and 649mm reach. It ships as a fully integrated turnkey unit (master stand, dual slave arms, grippers, cameras, PC, monitor, e-stop, and desk) pre-tuned from the factory — plug in and run.
At a glance
- Built for pick and place and lab automation
- Used across education, research and AI training
- Programmed through teach pendant
- Compatible with ROS
- Rated for operation at 10 40℃
- Sold in China
Buyer decision signals
Viability
Specifications
Category: Cobot- Axes
- 6
- Repeatability
- ±1 mm
- API / SDK
- Yes
Top 99% of 371 models with this spec
Company profile
- Founded
- 2023
Detailed specifications
What it is built for2
- Applications
- pick and place,bin picking,assembly,inspection
- Industries Served
- industrial manufacturing,logistics,public services,healthcare & elderly care,research & education,home,retail
Movement & precision2
- Arm Dof
- 6
- Obstacle Avoidance
- true
Controls & integration3
- Ros Compatible
- true
- Software Platform
- ROS2
- Programming Interface
- teach pendant
Safety & certification1
- Operating Temp
- -10-40℃
Other details48
- CPU
- Intel Core Ultra 7 155H
- RAM
- 16
- WiFi
- Supports WiFi 6, 2.4/5GHz dual-band
- Storage
- 512
- Arm Type
- 6-axis collaborative (EX001 platform)
- Bluetooth
- Supports Bluetooth 5.2
- IMU Sensor
- 1
- RGBD Camera
- 3
- Battery Life
- 8
- Arm Reach Mm
- 649
- Control Link
- wired
- Kit Contents
- Master-arm teleop stand (master arm, PC, monitor, e-stop), dual desktop slave arms (G gripper + camera, head camera + bracket), matching desktop
- Use Cases Raw
- 抓取、装配、分拣 (grasping, assembly, sorting)
- Charging Speed
- 10%-100% in 1h 40min
- Fisheye Camera
- 2
- Public Network
- Supports 5G
- Arm Payload Kg
- 7
- Debug Interface
- HDMI*1, USB*1, RJ45*1
- Base Payload Kg
- 6
- Peak Payload Kg
- 7
- Single Point TOF
- 3
- Storage Humidity
- 20%~70% RH (non-condensing)
- Ultrasonic Sensor
- 6
- Wide Angle Camera
- 2
- Operating Humidity
- 10%~90% RH (non-condensing)
- Vertical Workspace
- 0-1.6m
- Storage Temperature
- -20~60℃
- Binocular RGB Camera
- 1
- Neck Range Of Motion
- Pitch ±30°, Yaw ±90°
- Arm Repeatability Mm
- 1
- Master Slave Mapping
- 1:1, 6-DoF real-time
- Chassis Movement Mode
- Differential Drive
- Operating Temperature
- -10-40℃
- Task Payload Capacity
- 6
- Maximum Movement Speed
- 1
- Max Physical Dimensions
- Shoulder Width 658mm, Height 1690mm, Chassis Length 618mm
- Peak Payload Duration S
- 30
- Maximum Climbing Ability
- 10
- Maximum Payload Capacity
- 7
- Robotic Arm Repeatability
- 1
- Maximum Obstacle Traversal
- 4
- End Effector Gripper Stroke
- 0-180mm
- Robotic Arm Range Of Motion
- J1: -160°~160°; J2: 0°~210°; J3: -160°~0°; J4: -90°~90°; J5: -90°~90°; J6: -110°~110°;
- Vertical Lifting Capability
- Vertical lifting mechanism
- Single Arm Degrees Of Freedom
- 6
- Total Body Degrees Of Freedom
- 19
- Maximum End Effector Clamping Force
- 50
- Maximum Reach (Per Arm, Excluding Gripper)
- 649
Who runs it· deployment evidence
No deployment evidence on file
A deployment is recorded when a public source names the customer, or the maker confirms it. Nothing here counts against this robot.
14 other robots in this category have one.
Add a deployment →Where to buy
Get a price or reach an authorized seller — pick your region, then request a quote.
No authorized seller is listed for this robot yet — request a quote below and we’ll connect you with X Square Robots or an authorized seller.
Request a quote — goes straight to X Square Robots.
Every authorized seller serving your region is shown equally — placement is never sold, and this data never affects a robot’s score. A seller’s absence here doesn’t mean they aren’t authorized.
Compare with peers
More by X Square Robots
Frequently asked questions
- Who makes the Biflex Desktop?
- The Biflex Desktop is developed by X Square Robots, based in China.
- What type of robot is the Biflex Desktop?
- The Biflex Desktop is a Cobot made by X Square Robots.
- How much does the Biflex Desktop cost?
- Pricing for the Biflex Desktop is not publicly listed — contact X Square Robots for a quote.
- What are the key specifications of the Biflex Desktop?
- Key specifications of the Biflex Desktop: axes 6, repeatability ±1 mm, api / sdk Yes.
Reviews for Biflex Desktop
Loading reviews…
