The LPH040A1 is a Industrial Arm developed by DENSO Robotics (Japan). Key specifications: repeatability ±0.02 mm, programming no code gui.
RoboScore
Strong evidence
No confirmed deployment on record — this score reflects the rest of the record, not verified adoption.
3 of 9 signals present
Recomputed nightly from public data. Missing data is skipped, never zero-filled — and rankings are never for sale.
Weighted factors
average of the 3 scored · blanks don't count
Ranked #472 of 969 in the Industrial Arm standing.
See the standingWhere it has stood71 days · best #317 · worst #472
2 days of that is about LPH040A1 itself:
- 10 Aug RoboScore rose 2.39 — its evidence changed.
- 9 Sept RoboScore fell 0.18 — its evidence changed.
One reading per day since 3 Aug, when the current ordering began. The rank above is the reading for 13 Oct, taken against 969 robots — the standing itself is live, so a robot added since then counts there and not here yet.
Will it fit your job?
Tell us the job in plain words — we'll show how this robot measures up, line by line.
Tell us what your job needs — payload, budget, region, must-have certifications — and we'll show how LPH040A1 measures up, requirement by requirement. The RoboScore (trust) above is shown for every buyer, regardless.
Overview
High-performance, low-priced, compact and light weight SCARA Robot! Maximum arm reach 400mm, Maximum payload 3kg, Position repeatability ±0.02mm.
Buyer decision signals
Viability
COBOTTA PRO 900 launched
Specifications
Detailed specifications pending — claim this page to add yours.
Detailed specifications
What it is built for1
- Applications
- pick and place
Movement & precision2
- Dof
- 4
- Max Speed M S
- 4.71
Other details8
- Weight
- Approx. 16kg
- Cycle Time
- 0.45sec
- Max Force Fit
- 45N
- Operating Pressure
- 0.05～0.35MPa
- Position Detection
- Absolute encoder
- Drive Motor And Brake
- AC servomotors for all joints / Brakes for Z axis
- Max Allowable Pressure
- 0.6MPa
- Max Allowable Moment Of Inertia
- 0.075kgm^2
Who runs it· deployment evidence
No deployment evidence on file
A deployment is recorded when a public source names the customer, or the maker confirms it. Nothing here counts against this robot.
4 other robots in this category have one.
Add a deployment →Where to buy
Get a price or reach an authorized seller — pick your region, then request a quote.
No authorized seller is listed for this robot yet — request a quote below and we’ll connect you with DENSO Robotics or an authorized seller.
Request a quote — goes straight to DENSO Robotics.
Every authorized seller serving your region is shown equally — placement is never sold, and this data never affects a robot’s score. A seller’s absence here doesn’t mean they aren’t authorized.
Company milestones
- Jun 2023LaunchCOBOTTA PRO featured at automatica 2023
- 2024MilestoneCOBOTTA PRO shown at Global Industrie 2024
- 2023LaunchCOBOTTA PRO 900 launched
- 2020LaunchVMB series introduced
- 2018LaunchCOBOTTA launched
- 2017LaunchHSR robot launched
- 2012LaunchRC8 robot controller introduced
- 2001MilestoneDENSO WAVE established
Compare with peers
DENSO Robotics in the news
the maker1 event · last 12 months
DENSO introduces WINCAPS III robot programming software
DENSO Robotics in the news
the maker1 event · last 12 months
News about DENSO Robotics, the maker — not about this robot specifically, except rows marked this robot. Collected and classified independently across 1 outlet, so a maker cannot add to it. It never changes this robot's RoboScore — the evidence half of the RoboIndex — and it can move it up a board by at most 15 points. See all DENSO Robotics news
Frequently asked questions
- Who makes the LPH040A1?
- The LPH040A1 is developed by DENSO Robotics, based in Japan.
- What type of robot is the LPH040A1?
- The LPH040A1 is a Industrial Arm made by DENSO Robotics.
- How much does the LPH040A1 cost?
- Pricing for the LPH040A1 is not publicly listed — contact DENSO Robotics for a quote.
- What are the key specifications of the LPH040A1?
- Key specifications of the LPH040A1: repeatability ±0.02 mm, programming no code gui.
Reviews for LPH040A1
Loading reviews…
